Product Overview
Service kit to replace the wear and tear parts in a Light Monkey Tinkle Valve
Includes duckbill valve, duckbill washer, umbrella valve, and o-ring
For installation, it is recommended to rinse and clean the Tinkle Valve with a 50/50 mixture of vinegar and alcohol thoroughly before you begin
Ensure that all replacement parts are clean and free of any dust or debris
DO NOT over tighten the set screw in the duckbill valve opening; this will manipulate the valve, causing it to leak
The best way to test if the kit was installed correctly is by blowing and sucking through the hose
Testing the duckbill valve:
-Turn Delrin cap clockwise, closing it
-Blow through the hose
-If no air exits the duckbill valve opening, you have successfully installed the duckbill valve
-Blow through the hose
-If no air exits the duckbill valve opening, you have successfully installed the duckbill valve
Testing the umbrella valve:
-Ensure the Delrin cap is open by turning it counter-clockwise
-Completely cover the duckbill valve opening, creating an airtight seal
-Suck in though the hose
-If air cannot be sucked in, you have successfully installed the umbrella valve
-Completely cover the duckbill valve opening, creating an airtight seal
-Suck in though the hose
-If air cannot be sucked in, you have successfully installed the umbrella valve
